C F RP加固震损钢筋混凝土框架结构的抗整体性倒塌能力分析          下载免费PDF全文

韩建平  何梁华 《世界地震工程》2020,(1):008-16

首先介绍了CFRP加固受损钢筋混凝土柱的数值模拟方法，通过OpenSees软件进行了建模分析，数值模拟结果与试验结果的对比验证了该数值模型的有效性；其次，对一6层钢筋混凝土框架以受极罕遇地震影响进行预损，采用损伤指数和折减系数的方法建立震损钢筋混凝土框架的分析模型，并选择5种不同的CFRP加固方案对其进行加固；最后，对CFRP加固的震损RC框架进行增量动力分析。定量的评价了CFRP加固震损RC框架的抗整体性倒塌能力和抗倒塌安全储备。结果表明:CFRP加固能有效提高震损钢筋混凝土框架结构的抗震性能。加固部位的选择对加固效果的影响很大，在所选用的5种CFRP加固方案中，对底层及第2层的梁柱进行加固的方案对提高震损钢筋混凝土框架的抗整体性倒塌能力效果最佳。  相似文献   

Analytical modeling on consolidation of stiffened deep mixed column-reinforced soft soil under embankment     

Zhen Zhang  Fengrui Rao  Guanbao Ye 《国际地质力学数值与分析法杂志》2020,44(1):137-158

Stiffened deep mixed (SDM) column is a new ground improvement technique to improve soft soil, which can be used to increase bearing capacity, reduce deformation, and enhance stability of soft soil. This technique has been successfully adopted to support the highway and railway embankments over soft soils in China and other countries. However, there have been limited investigations on its consolidation under embankment loading. This paper developed an analytical solution for the consolidation of embankment over soft soil with SDM column in which core pile is equal to or shorter than outer DM column. The consolidation problem was simplified as a consolidation of composite soil considering the load shear effect of core pile. The developed solution was verified by a comparison with the results computed by three-dimensional (3-D) finite element analysis. A parametric study based on the derived solution was conducted to investigate influence factors—length of core pile, diameter of core pile, diameter of SDM column, modulus of DM column, and permeability coefficient of DM column—on the consolidation behavior of SDM column-supported embankment over soft soil. The developed solution was applied to a case history of SDM column-supported embankment, and a good agreement was found between the predictions and the field measurements.  相似文献   

煤层陷落柱多波地震数值模拟与成像研究     

朱广辉  韩建光  谷丙洛 《地质论评》2020,66(3):720-726

陷落柱是煤田勘探开发中常见的地质灾害体,陷落柱的精确探测一直是煤田安全生产研究的重点,单纯依靠常规纵波地震勘探技术难以满足现阶段煤田精细勘探的需求。多波地震勘探技术能够获得纵波和转换波地震资料,提供更丰富的波场信息,且转换波对于埋深较浅的小幅度构造有更高的分辨率,充分利用多分量地震资料可以有效的提高地震勘探的精度。本文将多波地震技术应用到煤层陷落柱研究中,利用数值方法对煤层陷落柱进行多波地震勘探模拟研究,采用弹性波有限差分方法对构建的陷落柱模型进行多分量正演模拟,然后分别对波场分离后的PP波和PS波地震数据进行叠前深度偏移成像测试。通过对两个小尺寸陷落柱模型进行多波地震数值试算表明,多波地震勘探技术是一种有效的煤层陷落柱探测方法,充分利用多波地震资料有利于查明煤层陷落柱构造,对陷落柱取得更好的勘探效果。  相似文献   

Boundary frame contribution in coupled and uncoupled steel plate shear walls          下载免费PDF全文

Meng Wang  Daniel J. Borello  Larry A. Fahnestock 《地震工程与结构动力学》2017,46(14):2355-2380

The steel plate shear wall (SPSW) system is a robust option for earthquake resistance due to the strength, stiffness, ductility and energy dissipation that it provides. Although thin infill plates are efficient for resisting lateral loads, boundary frames that are proportioned based on capacity design requirements add significant structural weight that appears to be one of the factors limiting the use of the system in practice. An alternate configuration, the SPSW with coupling (SPSW‐WC), was explored recently as an option for increasing architectural flexibility while also improving overall system economy and seismic performance. The SPSW‐WC, which extensively employs flexural boundary frame contribution, has shown promise in analytical, numerical and experimental studies, but recent research on uncoupled SPSWs suggests that boundary frame contribution should not be considered for carrying seismic design shear. As a result, in the present study, boundary frame contribution in SPSWs was explored with detailed three‐dimensional finite element models, which were validated against large‐scale SPSW‐WC tests. Six‐story systems were considered, and the study matrix included single and double uncoupled SPSWs along with coupled SPSWs that had various degrees of coupling. Variations in design methodology were also explored. The modeling framework was employed to conduct static monotonic and cyclic pushover analyses and dynamic response history analysis. These analyses demonstrate the beneficial effect of coupling in SPSWs and illustrate the need to consider boundary frame contribution in design of coupled SPSWs. In addition, sharing design shear between the infill plate and the boundary frame is more generally shown to not be detrimental if this sharing is done in the design stage based on elastic analysis and the resulting boundary frame provides adequate secondary strength and stiffness following infill plate yielding. Copyright © 2017 John Wiley & Sons, Ltd.  相似文献   

Replaceable links with direct brace attachments for eccentrically braced frames          下载免费PDF全文

Mehmet Bakır Bozkurt  Cem Topkaya 《地震工程与结构动力学》2017,46(13):2121-2139

This paper reports findings of an experimental study conducted on replaceable links for steel eccentrically braced frames (EBFs). A replaceable link detail which is based on splicing the directly connected braces and the beam outside the link is proposed. This detail eliminates the need to use hydraulic jacks and flame cutting operations for replacement purposes. Performance of this proposed replaceable link was studied by conducting eight nearly full‐scale EBF tests under quasi‐static cyclic loading. The link length ratio, stiffening of the link, loading protocol, connection type, bolt pretension, gap size of splice connections, and demand‐to‐capacity ratios of members were considered as the prime variables. The specimens primarily showed two types of failure modes: link web fracture and fracture of the flange at the link‐to‐brace connection. No failures were observed at the splice connections indicating that the proposed replaceable link detail provides an excellent response. The inelastic rotation capacity provided by the replaceable links satisfied the requirements of the AISC Seismic Provisions for Structural Steel Buildings (AISC341–10). The overstrength factor of the links exceeded 2.0, which is larger than the value assumed for EBF links by design provisions. The high level of overstrength resulted in brace buckling in one of the specimens demonstrating the importance of overstrength factor used for EBF links. Copyright © 2017 John Wiley & Sons, Ltd.  相似文献   

Numerical simulation of the seismic behavior of self-centering steel beam-column connections with bottom flange friction devices     

Tong Guo  Lianglong Song  Guodong Zhang 《地震工程与工程振动(英文版)》2011,10(2):229-238

A new type of steel moment resisting frame with bottom ? ange friction devices (BFFDs) has been developed to provide self-centering capacity and energy dissipation, and to reduce permanent deformations under earthquakes. This paper presents a numerical simulation of self-centering beam-column connections with BFFDs, in which the gap opening /closing at the beam-column interfaces is simulated by using pairs of zero-length elements with compression-only material properties, and the energy dissipation due to f...  相似文献   

Pseudo-dynamic test and numerical simulation of high-strength concrete frame structure reinforced with high-strength rebars     

Xin Chen  Shi Yan  Baojian Ji 《地震工程与工程振动(英文版)》2011,10(2):303-311

This paper describes an investigation of a high-strength concrete frame reinforced with high-strength rebars that was tested in the structure engineering laboratory at Shenyang Jianzhu University. The frame specimen was pseudo- dynamically loaded to indicate three earthquake ground motions of different hazard levels, after which the test specimen was subjected to a pseudo-static loading. This paper focuses on the design, construction and experiment of the test frame and validation of the simulation models. Research shows that a high-strength concrete frame reinforced with high-strength rebars is more eff icient and economical than a traditional reinforced concrete frame structure. In addition to the economies achieved by effective use of materials, research shows that the frame can provide enough strength to exceed conventional reinforced concrete frames and provide acceptable ductility. The test study provides evidence to validate the performance of a high- strength concrete frame designed according to current seismic code provisions. Based on previous test research, a nonlinear FEM analysis is completed by using OpenSees software. The dynamic responses of the frame structure are numerically analyzed. The results of the numerical simulation show that the model can calculate the seismic responses of the frame by OpenSees. At the same time, the test provides additional opportunities to validate the performance of the simulation models.  相似文献   

Seismic design factors for RC special moment resisting frames in Dubai, UAE     

Mohammad AlHamaydeh  Sulayman Abdullah  Ahmed Hamid  Abdilwahhab Mustapha 《地震工程与工程振动(英文版)》2011,10(4):495-506

This study investigates the seismic design factors for three reinforced concrete (RC) framed buildings with 4, 16 and 32-stories in Dubai, UAE utilizing nonlinear analysis. The buildings are designed according to the response spectrum procedure defined in the 2009 International Building Code (IBC’09). Two ensembles of ground motion records with 10% and 2% probability of exceedance in 50 years (10/50 and 2/50, respectively) are used. The nonlinear dynamic responses to the earthquake records are computed using IDARC-2D. Key seismic design parameters are evaluated; namely, response modification factor (R), deflection amplification factor (Cd), system overstrength factor (Ωo), and response modification factor for ductility (Rd) in addition to inelastic interstory drift. The evaluated seismic design factors are found to significantly depend on the considered ground motion (10/50 versus 2/50). Consequently, resolution to the controversy of Dubai seismicity is urged. The seismic design factors for the 2/50 records show an increase over their counterparts for the 10/50 records in the range of 200%-400%, except for the Ωo factor, which shows a mere 30% increase. Based on the observed trends, period-dependent R and Cd factors are recommended if consistent collapse probability (or collapse prevention performance) in moment frames with varying heights is to be expected.  相似文献   

再生混凝土框架抗震性能试验研究   总被引：1，自引：0，他引：1  

闵珍  孙伟民  郭樟根 《世界地震工程》2011,27(1)

通过2榀再生骨料掺量分别为25%、50%的再生混凝土框架和1榀普通对比混凝土框架的低周反复加载试验,研究了再生混凝土框架的受力全过程、开裂荷载和极限承载力、破坏形态,分析了再生混凝土框架的滞回曲线、骨架曲线、变形性能、耗能能力等抗震性能,并和普通混凝土框架进行了对比分析。研究结果表明,随着再生骨料掺量的增加,再生混凝土框架的极限承载力、变形能力、耗能能力等抗震性能没有明显降低,再生混凝土框架具有较好的抗震性能,再生混凝土框架应用于实际工程是可行的。文中研究成果可为再生混凝土框架结构的工程应用提供依据。  相似文献   

六盘水市煤炭资源开发利用结构调整与优化的探讨     

游桂芝  潘庆英 《中国煤炭地质》2011,(5):69-72

六盘水市矿产资源丰富,尤以煤炭为主,但从目前煤炭资源开发利用现状来看,其结构布局尚欠合理,开发利用方式比较粗放,存在＂采富弃贫、大矿小开、一矿多开、技术落后、安全条件差、资源回收率低＂等现象,环境保护与恢复治理的难度也越来越大。为了提高煤炭资源开采利用效率,从规模结构、技术结构、产品结构三个方面提出了六盘水市煤炭资源开发利用结构调整与优化方法：要求新建矿山在30万t/a以上,最低服务年限不低于25年,将目前的小型煤矿山减少到125个;采用高新技术和先进技术,促进矿企产业升级;进行产品结构调整,改变采矿、选矿、冶炼方式,实现集约型经营。  相似文献